Reman Holset Cummins ISB 6.7L Electronic Actuator 6382096HX
OEM
$1,237.99
Remanufactured Holset Cummins Electronic Actuators from TURBOS.COM restore precise turbo control for optimal engine performance without replacing an entire turbocharger. Fully remanufactured by Holset and tested to meet OEM specs, these OEM units ensure reliability, fuel efficiency, and reduced emissions at a lower cost than new replacements.
- Remanufactured by Holset
- Direct-fit replacement for the part numbers below
- $200 Refundable Core Deposit
Condition: Remanufactured
Brand: Holset
Component OEM: Cummins
Refundable Core Deposit: $200
Applications: Cummins ISB 6.7L
| Replaces the following part numbers | ||
|---|---|---|
| 04316368 | 0435288 | 172-032-0095 |
| 172-032-0120 | 1720320095 | 1720320120 |
| 3778619 | 3778619NX | 3778619RX |
| 3778623 | 3784299 | 3785180 |
| 3788936 | 4034168 | 4034168NX |
| 4034168RX | 4034309 | 403430900H |
| 403430900HX | 4034309H | 4034309HX |
| 4034309NX | 4034309RX | 4034395 |
| 4034395NX | 4034395RX | 4639555 |
| 4642999 | 5452689 | 5459882 |
| 5494878 | 549487800H | 549487800HX |
| 5494878H | 5494878HX | 5494878NX |
| 5494878RX | 5555542 | 5601240 |
| 560124000H | 560124000HX | 5601240H |
| 5601240HX | 5601240K | 5601240KX |
| 5601240NX | 5601240RX | 6318460 |
| 6374774 | 6374774RX | 6382096 |
| 6382096H | 6382096HX | 6382096NX |
| 6382096RX | ||
Install Guide
Turbocharger Installation Best Practices
Proper installation helps prevent premature turbocharger failure. Inspect the oil, air, coolant, intake, and exhaust systems to make sure the new turbocharger has clean oil flow, proper airflow, and no restrictions or leaks.
Change Engine Oil & Oil Filter
Fresh oil and a new filter are required for every turbo installation.
Inspect or Replace Engine Air Filter & Intake Ducting
Make sure the intake system is clean and free of debris or restriction.
Inspect Oil Feed Line & Drain Line
Restricted, clogged, or contaminated oil lines can cause premature turbo failure.
Inspect any Applicable Coolant Lines
Water-cooled turbos require clean, unrestricted, leak-free coolant lines.
Check Intercooler & Exhaust Systems
Inspect hoses, clamps, intercooler piping, exhaust leaks, and foreign object damage. Oil residue in the intercooler or exhaust can indicate significant engine issues.
Prime Turbo Before Startup
Pre-lube the turbocharger and verify oil flow before normal engine operation.
Important:
Always follow the vehicle manufacturer’s service procedures. A replacement turbo can fail early if the original cause of failure is not corrected. Undiagnosed engine issues can lead to denied warranty claims.
