Garrett Turbo GTA4702B Low PSI 170-025-1663

OEM
SKU:
170-025-1663
Availability:
Contact Us for Lead Time
$1,936.99
UPS GROUND SHIPPING:
$49.99
Current Stock:
Condition: Remanufactured
Brand: D&W
Component OEM: Garrett
Model: GTA4702B
 
Vehicle Applications:
 Caterpillar (CAT) C13 ACERT
 
Cross References:
10R-2226 10R2226 1700251663
242-1289 2421289 752394-0001
752394-0002 752394-5001 752394-5001S
752394-5002 752394-5002S 752394-9001
752394-9002 7523940001 7523940002
7523945001 7523945001S 7523945002
7523945002S 7523949001 7523949002
Install Guide

Turbocharger Installation Best Practices

Proper installation helps prevent premature turbocharger failure. Inspect the oil, air, coolant, intake, and exhaust systems to make sure the new turbocharger has clean oil flow, proper airflow, and no restrictions or leaks.

✓
Change Engine Oil & Oil Filter Fresh oil and a new filter are required for every turbo installation.
✓
Inspect or Replace Engine Air Filter & Intake Ducting Make sure the intake system is clean and free of debris or restriction.
✓
Inspect Oil Feed Line & Drain Line Restricted, clogged, or contaminated oil lines can cause premature turbo failure.
✓
Inspect any Applicable Coolant Lines Water-cooled turbos require clean, unrestricted, leak-free coolant lines.
✓
Check Intercooler & Exhaust Systems Inspect hoses, clamps, intercooler piping, exhaust leaks, and foreign object damage. Oil residue in the intercooler or exhaust can indicate significant engine issues.
✓
Prime Turbo Before Startup Pre-lube the turbocharger and verify oil flow before normal engine operation.
Important: Always follow the vehicle manufacturer’s service procedures. A replacement turbo can fail early if the original cause of failure is not corrected. Undiagnosed engine issues can lead to denied warranty claims.